Description
The APS MP-W power supply module is designed for industrial applications. It accepts 300V input and delivers plus and minus 12V output at 5 amps each, providing a total of 180 watts power. This module is suitable for systems requiring symmetrical dual-voltage rails with high current capacity. The part number is MP-W. The module ID is W. The input voltage is 300V. The output specifications are plus and minus 12V at 5 amps per rail. The total power output is 180 watts.
Technical identification
This Lambda3Tech unit is identified as an APS MP-W power supply module with MODULE I.D. W. The exact combination of part number and module ID should be matched when sourcing a replacement because the MP-W family includes different output configurations.
| Specification | Listed value |
|---|---|
| Family / model | APS MP-W |
| Part number | MP-W |
| Module ID | W |
| Input voltage | 300V |
| Output configuration | Symmetrical +12V / -12V dual rails |
| Output current | 5A per rail |
| Stated total power | 180W |
| Lambda3Tech SKU | MP-W-W |
| Condition | Used industrial component |
Output configuration note
The listed +12V and -12V rails at 5A each correspond to 120W when both rails are considered together. The 180W figure is retained as the stated total module power rating. No additional output rails, derating conditions or operating modes are inferred from the available identification.
Identification and compatibility
The MODULE I.D. W marking is important for this specific unit. Lambda3Tech also carries an APS MP-W module identified as MODULE I.D.:H with a different 5V output configuration. These are therefore different configurations within the same MP-W family and should not be treated as interchangeable without confirming the equipment requirements.
For replacement purposes, match the complete physical identification: MP-W part number plus MODULE I.D. W, together with the required +12V / -12V output configuration.
The physical inventory identification recorded for this unit remains the primary reference. External information is used only as supporting context and does not replace or weaken the recorded part number, module ID or electrical markings.
Related APS power modules
See also the APS MP-W MODULE I.D.:H, 300V input, 5V 25A and the APS MP-D-1437, 300V input, 3.3V 35A for other APS industrial power-supply modules.
Reviews
There are no reviews yet.